Relays-&-Power-Distribution > Bus-Bars
Blue Sea Systems PowerBar 1000A Common BusBars
Complex wiring systems require a single point to consolidate large and small conductors. The Blue Sea Systems PowerBar 1000 offers a 1,000 amp busbar with various size studs and screws to connect conductors and fuse blocks. A snap-on insulating cover is included. These PowerBars feature tin-plated pure electrical copper for maximum conductivity. A stepped bus design offers two elevations for conductors which doubles the density of the wire loom compared to traditional bus bars. Busbar and fuse block elevations match common fuse blocks allowing for multiple fuse block attachment, eliminating the need for connecting cables. One-piece serrated flange nuts ensure correct and secure connections. Stainless steel 8-32 screws with captive lock washers for securing smaller gauge wires. Busbar may be cut to a shorter length to accommodate constricted spaces. Bi-directional busbar end caps allow the ganging of additional busbars. Snap on insulating cover meets ABYC and USCG requirements and includes label recess. Models available to accommodate either 3/8" or 5/16" terminals.
- Continuous Rating: 1000A.
- Max. Operating Voltage: 150V AC/DC.
- Mounting Holes: Accepts #10 (M5) screws.
- Bus Material: Tin-Plated Copper C11000.
|In Stock||Add to Cart|
|80560||1,000A PowerBar 8 x 3/8" Stud with Cover (BSS 1990) (1 MIN)||164.69||1 EA||✓|
|80561||1,000A PowerBar 12 x 3/8" Stud with Cover (BSS 1991) (1 MIN)||205.89||1 EA||✓|
|80562||1,000A PowerBar 8 x 5/16" Stud with Cover (BSS 1992) (1 MIN)||164.69||1 EA||✓|
|80563||1,000A PowerBar 12 x 5/16" Stud with Cover (BSS 1993) (1 MIN)||195.69||1 EA||✓|