Battery-Cables-&-Accessories > Battery-Chargers > Battery-Chargers
Charge Pro Battery Chargers - 6 Amp, 1 Bank
Charge Pro onboard chargers are designed for harsh marine and industrial environments moisture, salt, shock and vibration tested to satisfy the most demanding customer requirements and meet the toughest worldwide standards including UL, CSA, ABYC, and the latest California efficiency regulations (CEC). These chargers offer non corroding housing for ultimate reliability, as well as intuitive operation - Sense-Send technology senses the power needs of each battery and sends correct charge.
- One 6 Amp Output
- Battery System: 12V
- Charge flooded and AGM batteries
- Microprocessor controlled for accurate charging
- Universal 120/230V input for go-anywhere freedom
- Completely sealed, epoxy filled
- IP68 waterproof
- Footprint same as former Charge Pro Guest Chargers
| 6 AMP, 1 BANK | 10 AMP, 2 BANKS | INLET | |||||||||||||||
| Item | Description |
Price
|
Qty in
Package |
In Stock | Add to Cart | |||
| 991560 | On-Board Battery Charger, 6 Amp, 12V, 1 Bank, 120V Input, Marinco 28106 (1 MIN) |
|
1 EA | ✓ |
Charge Pro Battery Chargers - 10 Amp, 2 Banks
Charge Pro onboard chargers are designed for harsh marine and industrial environments moisture, salt, shock and vibration tested to satisfy the most demanding customer requirements and meet the toughest worldwide standards including UL, CSA, ABYC, and the latest California efficiency regulations (CEC). These chargers offer non corroding housing for ultimate reliability, as well as intuitive operation - Sense-Send technology senses the power needs of each battery and sends correct charge.
- Amps per output: 5. Total Amps: 10
- Battery System: 12V + 12V or 24V
- Charge flooded and AGM batteries
- Microprocessor controlled for accurate charging
- Universal input 120/230V input for go-anywhere freedom
- Completely sealed, epoxy filled
- IP68 waterproof
- Footprint same as former Charge Pro Guest Chargers
- Isolated outputs can be put in series or parallel for higher voltage or current
| 6 AMP, 1 BANK | 10 AMP, 2 BANKS | INLET | |||||||||||||||
| Item | Description |
Price
|
Qty in
Package |
In Stock | Add to Cart | |||
| 991565 | On-Board Battery Charger, 10 Amp (5/5), 12/24V, 2 Bank, 120V Input, Marinco 28210 (1 MIN) |
|
1 EA | ✓ |
Charge Pro Battery Chargers - Inlet
The Marinco Connect-Charge inlet is a receptacle designed to accept plug-in Guest and Marinco ConnectCharge on-board battery chargers. This model features universal mounting: use three screws through the faceplate to mount it from the front or use a threaded locking ring to mount it to the dash from the rear. The watertight lid snaps closed to protect the AC plug.
- Mounts easily to fiberglass and aluminum hulls
- Low profile cap will not catch fishing line
- UV resistant housing/cap
- Use with Marinco/Guest ConnectCharge plugs only
| 6 AMP, 1 BANK | 10 AMP, 2 BANKS | INLET | |||||||||||||||
| Item | Description |
Price
|
Qty in
Package |
In Stock | Add to Cart | |||
| 991570 | Front/Rear Charger Mount with PVC Cover, Marinco 150CCI (1 MIN) |
|
1 EA | ✓ |
.jpg)
