Del City hi-amp 3/8" stud auto reset circuit breakers are designed to be mounted on any flat surface application, and are commonly referred to as Type I Circuit Breakers. These hi amp breakers will operate/cycle continuously during an overcurrent condition in DC applications. It's the internal composite alloy material which will deflect and separate the contacts when an over-current situation occurs and return to the run mode as it cools. Del City auto reset circuit breakers operation will continue to recycle until the source of the overcurrent is removed or corrected. These circuit breakers are typically used in primary feeder circuits in trucks, buses, RVs and marine applications. However, they can also be used in battery chargers and welding equipment.

• Splash and dust proof to IP67. Meet SAE J1625, J1171, UL1500 (ignition protected).
• Rated up to 32V DC.
• Operating Temperature: -32°C to 82°C (-25°F to 180°F).
• Storage Temperature: -34°C to 149°C (-30°F to 300°F).
• Stud Size: 3/8", 16 threads per inch.
• Protective stud insulators are included.
• Housing is thermal plastic, UL rated 94V0.
• Torque Rating: 3/8” @ 150 in-lb (17Nm) Max
• Products on this page may be affected by tariff charges at checkout.