Terminals > Ring-Terminals > Non!Insulated-Ring-Terminals

Non-Insulated Ring Terminals - 22-18 Gauge

Non-Insulated Ring Terminals

Non-insulated ring terminals are connectors that are used to mate, connect, or terminate a single wire, while allowing a connection to a screw or stud type electrical connection. Non-insulated ring terminals are best suited when special performance or installation characteristics are not needed. Non-insulated ring terminals are commonly used in automotive and marine vehicles, but can be used in various other electrical applications.


  • This non-insulated terminal series is the most economical terminal available.
  • Use these terminals when special performance or installation characteristics are not needed.
  • Rated 600 volts maximum, building wire; 1000 volts maximum, signs and fixtures.
  • Temperature rating: 105° C (221° F).
  • Terminals have a butted seam.
  • UL E96029, CSA Listed.
Item Description Price
1+ I Ext. Price I 1000+ Ext. Price I I 10000+ Ext. Price I
Qty in
Package 		In Stock Add to Cart
151045 Non-Insulated Ring Terminal, 4 Stud, 22-18 Ga (100 MIN)
0.06900 6.90 I 0.04900 4.90 I 0.03 3.00
100 EA Call
151065 Non-Insulated Ring Terminal, 6 Stud, 22-18 Ga (100 MIN)
0.07 7.00 I 0.04900 4.90 I 0.03 3.00
100 EA ✓
151085 Non-Insulated Ring Terminal, 8 Stud, 22-18 Ga (100 MIN)
0.06900 6.90 I 0.04800 4.80 I 0.03 3.00
100 EA ✓
151105 Non-Insulated Ring Terminal, 10 Stud, 22-18 Ga (100 MIN)
0.07 7.00 I 0.04900 4.90 I 0.03 3.00
100 EA ✓
151145 Non-Insulated Ring Terminal, 1/4" Stud, 22-18 Ga (100 MIN)
0.10600 10.60 I 0.07300 7.30 I 0.04700 4.70
100 EA ✓
151565 Non-Insulated Ring Terminal, 5/16" Stud, 22-18 Ga (100 MIN)
0.10800 10.80 I 0.07300 7.30 I 0.04800 4.80
100 EA ✓

Non-Insulated Ring Terminals - 16-14 Gauge

Non-Insulated Ring Terminals

Non-insulated ring terminals are connectors that are used to mate, connect, or terminate a single wire, while allowing a connection to a screw or stud type electrical connection. Non-insulated ring terminals are best suited when special performance or installation characteristics are not needed. Non-insulated ring terminals are commonly used in automotive and marine vehicles, but can be used in various other electrical applications.


  • This non-insulated terminal series is the most economical terminal available.
  • Use these terminals when special performance or installation characteristics are not needed.
  • Rated 600 volts maximum, building wire; 1000 volts maximum, signs and fixtures.
  • Temperature rating: 105° C (221° F).
  • Terminals have a butted seam.
  • UL E96029, CSA Listed.
Item Description Price
1+ I Ext. Price I 1000+ Ext. Price I I 10000+ Ext. Price I
Qty in
Package 		In Stock Add to Cart
152045 Non-Insulated Ring Terminal, 4 Stud, 16-14 Ga (100 MIN)
0.07 7.00 I 0.04900 4.90 I 0.03300 3.30
100 EA ✓
152065 Non-Insulated Ring Terminal, 6 Stud, 16-14 Ga (100 MIN)
0.06900 6.90 I 0.04800 4.80 I 0.03300 3.30
100 EA ✓
152085 Non-Insulated Ring Terminal, 8 Stud, 16-14 Ga (100 MIN)
0.06900 6.90 I 0.04800 4.80 I 0.03300 3.30
100 EA ✓
152105 Non-Insulated Ring Terminal, 10 Stud, 16-14 Ga (100 MIN)
0.07 7.00 I 0.04900 4.90 I 0.03300 3.30
100 EA ✓
152145 Non-Insulated Ring Terminal, 1/4" Stud, 16-14 Ga (100 MIN)
0.10600 10.60 I 0.07400 7.40 I 0.05 5.00
100 EA ✓
152565 Non-Insulated Ring Terminal, 5/16" Stud, 16-14 Ga (100 MIN)
0.10600 10.60 I 0.07300 7.30 I 0.05 5.00
100 EA ✓
152385 Non-Insulated Ring Terminal, 3/8" Stud, 16-14 Ga (100 MIN)
0.12100 12.10 I 0.07700 7.70 I 0.05200 5.20
100 EA ✓

Non-Insulated Ring Terminals - 12-10 Gauge

Non-Insulated Ring Terminals

Non-insulated ring terminals are connectors that are used to mate, connect, or terminate a single wire, while allowing a connection to a screw or stud type electrical connection. Non-insulated ring terminals are best suited when special performance or installation characteristics are not needed. Non-insulated ring terminals are commonly used in automotive and marine vehicles, but can be used in various other electrical applications.


  • This non-insulated terminal series is the most economical terminal available.
  • Use these terminals when special performance or installation characteristics are not needed.
  • Rated 600 volts maximum, building wire; 1000 volts maximum, signs and fixtures.
  • Temperature rating: 105° C (221° F).
  • Terminals have a butted seam.
  • UL E96029, CSA Listed.
Item Description Price
1+ I Ext. Price I 1000+ Ext. Price I I 10000+ Ext. Price I
Qty in
Package 		In Stock Add to Cart
153065 Non-Insulated Ring Terminal, 6 Stud, 12-10 Ga (100 MIN)
0.12700 12.70 I 0.09500 9.50 I 0.06600 6.60
100 EA ✓
153085 Non-Insulated Ring Terminal, 8 Stud, 12-10 Ga (100 MIN)
0.12600 12.60 I 0.09700 9.70 I 0.06700 6.70
100 EA ✓
153105 Non-Insulated Ring Terminal, 10 Stud, 12-10 Ga (100 MIN)
0.12600 12.60 I 0.09700 9.70 I 0.06700 6.70
100 EA Call
153145 Non-Insulated Ring Terminal, 1/4" Stud, 12-10 Ga (100 MIN)
0.17700 17.70 I 0.12100 12.10 I 0.08700 8.70
100 EA ✓
153565 Non-Insulated Ring Terminal, 5/16" Stud, 12-10 Ga (100 MIN)
0.17700 17.70 I 0.12100 12.10 I 0.08700 8.70
100 EA ✓
153385 Non-Insulated Ring Terminal, 3/8" Stud, 12-10 Ga (100 MIN)
0.18300 18.30 I 0.12500 12.50 I 0.09 9.00
100 EA ✓
153125DL Non-Insulated Ring Terminal, 1/2" Stud, 12-10 Ga (100 MIN)
0.27 27.00 I 0.24500 24.50 I 0.17200 17.20
100 EA ✓

Non-Insulated Ring Terminals - 8 Gauge & 6 Gauge

Non-Insulated Ring Terminals

Non-insulated ring terminals are connectors that are used to mate, connect, or terminate a single wire, while allowing a connection to a screw or stud type electrical connection. Non-insulated ring terminals are best suited when special performance or installation characteristics are not needed. Non-insulated ring terminals are commonly used in automotive and marine vehicles, but can be used in various other electrical applications.


  • The barrel on this series can be crimped anywhere on the barrel surface.
  • The brazed seam will not separate under pressure or operating stress.
  • Stranded wire cannot escape the confines of the sealed barrel during or after crimping.
  • Rated to 600 volts maximum, building wire; 1000 volts maximum, signs and fixtures
  • Temperature rating: 105°C (221°F).
  • UL E96029, CSA Listed.
Item Description Price
1+ I Ext. Price I 1000+ Ext. Price I I 5000+ Ext. Price I
Qty in
Package 		In Stock Add to Cart
254085 Non-Insulated Ring Terminal, 8 Stud, 8 Ga (50 MIN)
0.33900 16.95 I 0.24600 12.30 I 0.11100 5.55
50 EA ✓
254105 Non-Insulated Ring Terminal, 10 Stud, 8 Ga (50 MIN)
0.33300 16.65 I 0.24100 12.05 I 0.11100 5.55
50 EA ✓
254145 Non-Insulated Ring Terminal, 1/4" Stud, 8 Ga (50 MIN)
0.33800 16.90 I 0.24600 12.30 I 0.11300 5.65
50 EA ✓
254565 Non-Insulated Ring Terminal, 5/16" Stud, 8 Ga (50 MIN)
0.34300 17.15 I 0.26 13.00 I 0.14 7.00
50 EA ✓
254385 Non-Insulated Ring Terminal, 3/8" Stud, 8 Ga (50 MIN)
0.34600 17.30 I 0.27100 13.55 I 0.14200 7.10
50 EA ✓
254125 Non-Insulated Ring Terminal, 1/2" Stud, 8 Ga (50 MIN)
0.63900 31.95 I 0.51400 25.70 I 0.39900 19.95
50 EA ✓
255105 Non-Insulated Ring Terminal, 10 Stud, 6 Ga (25 MIN)
0.45200 11.30 I 0.35200 8.80 I 0.23 5.75
25 EA ✓
255145 Non-Insulated Ring Terminal, 1/4" Stud, 6 Ga (25 MIN)
0.56700 14.17 I 0.43800 10.95 I 0.30700 7.67
25 EA ✓
255565 Non-Insulated Ring Terminal, 5/16" Stud, 6 Ga (25 MIN)
0.64600 16.15 I 0.50500 12.63 I 0.35300 8.82
25 EA ✓
255385 Non-Insulated Ring Terminal, 3/8" Stud, 6 Ga (25 MIN)
0.69500 17.38 I 0.54500 13.63 I 0.37100 9.28
25 EA ✓
255125 Non-Insulated Ring Terminal, 1/2" Stud, 6 Ga (25 MIN)
0.76800 19.20 I 0.60200 15.05 I 0.39400 9.85
25 EA ✓

Non-Insulated Ring Terminals - 4 Gauge & 2 Gauge

Non-Insulated Ring Terminals

Non-insulated ring terminals are connectors that are used to mate, connect, or terminate a single wire, while allowing a connection to a screw or stud type electrical connection. Non-insulated ring terminals are best suited when special performance or installation characteristics are not needed. Non-insulated ring terminals are commonly used in automotive and marine vehicles, but can be used in various other electrical applications.


  • The barrel on this series can be crimped anywhere on the barrel surface.
  • The brazed seam will not separate under pressure or operating stress.
  • Stranded wire cannot escape the confines of the sealed barrel during or after crimping.
  • Rated to 600 volts maximum, building wire; 1000 volts maximum, signs and fixtures
  • Temperature rating: 105°C (221°F).
  • UL E96029, CSA Listed.
Item Description Price
1+ I Ext. Price I 1000+ Ext. Price I I 5000+ Ext. Price I
Qty in
Package 		In Stock Add to Cart
256145 Non-Insulated Ring Terminal, 1/4" Stud, 4 Ga (25 MIN)
0.72800 18.20 I 0.50 12.50 I 0.33700 8.43
25 EA Call
256565 Non-Insulated Ring Terminal, 5/16" Stud, 4 Ga (25 MIN)
0.80200 20.05 I 0.64200 16.05 I 0.42800 10.70
25 EA ✓
256385 Non-Insulated Ring Terminal, 3/8" Stud, 4 Ga (25 MIN)
0.85200 21.30 I 0.68300 17.08 I 0.45600 11.40
25 EA ✓
256125 Non-Insulated Ring Terminal, 1/2" Stud, 4 Ga (25 MIN)
1.01100 25.27 I 0.79300 19.82 I 0.52400 13.10
25 EA ✓
257145 Non-Insulated Ring Terminal, 1/4" Stud, 2 Ga (25 MIN)
0.70 17.50 I 0.53700 13.43 I 0.38700 9.68
25 EA ✓
257565 Non-Insulated Ring Terminal, 5/16" Stud, 2 Ga (25 MIN)
1.14600 28.65 I 0.91700 22.93 I 0.61200 15.30
25 EA ✓
257385 Non-Insulated Ring Terminal, 3/8" Stud, 2 Ga (25 MIN)
1.18600 29.65 I 0.95 23.75 I 0.63400 15.85
25 EA ✓
257125 Non-Insulated Ring Terminal, 1/2" Stud, 2 Ga (25 MIN)
1.49200 37.30 I 1.21900 30.48 I 0.82 20.50
25 EA ✓
Prop65 Warning