Blue Sea Systems Battery Switches - e-Series - 4 Position
Optimize Your Power System with Blue Sea Systems 4 Position Battery Switches
These four position Blue Sea Systems battery switches offer 350 amps for inboard gasoline or diesel engines. These switches switch isolated battery banks to all loads or combines battery banks to all loads and feature tin-plated copper studs for maximum conductivity and corrosion resistance. The studs accept 3/8" (M10) ring terminals and have a 7/8" stud length (22 mm) that can accept multiple cable terminals. Accepts up to 4/0 AWG battery cables. Blue Sea Systems one-piece terminal stud design never loosens over time. One-piece stainless flange nuts ensure safe and secure connections. Fits most Perko and Guest low amperage battery switch hole patterns. Case design allows surface or rear panel mounting options. Part number 5437 includes Alternator Field Disconnect (AFD) which protects the diodes in the alternator in the event of the switch being switched to the OFF position while the engine is running. If the AFD is not used to protect the alternator, an LED can be connected to the AFD terminals to indicate when the battery switch is in any position but OFF.
- OFF-1-BOTH-2
- Cranking Rating (10 Sec.) 2,000A; Cranking Rating (1 Min.) 1,000A
- Intermittent Rating (5 Min.) 600A
- Continuous Rating: 350A @ 32V DC Maximum
- CE marked, ISO 8846, UL listed - UL1107 electrical power switches. Meets ABYC requirements. Meets UL 1500 and SAE J1171 external ignition protection requirements.
- IP66